Make sure you have plenty of space
Carefully remove the contents of the bag
Unfold your SK-TEK Bivvy
Once fully unfolded…
Open both door zips
Ready to connect the poles
Join the poles together
Attach tension strap
Shorten tension strap
Zip up the doors
Make sure both doors are zipped closed
Ensure rib goes inside the webbing
Place the rib fully inside webbing
Rear pole spike
Place the rear pole spike in bivvy housing
Rear spike / housing in position
Tighten the rear pole
Place the middle tension bar through webbing
Tighten the middle tension bar
Middle tension bar in position
Place peak pole into right side slots
Place peak pole into left side slots
Attach peak tension bar
Pull the peak tension bar tight
Start to peg from rear working forward
Ensure pegs are firmly in the ground
Perfect, thanks.
Now would love to see instructions of how to setup the 60 inch brolly, add the brolly front, tighten it all up and peg out properly, without spending more money on 2 storm poles!
Thanks for the instructions. I am going to put up in the garden now for a test run before I hit the bank this week.